Dual action polisher 650W - 125mm | Incl. 4 polishing pads

€69.95 €57.81
In stock
SKU
S_PM504AC

Get your car, boat or motorbike back in top condition!

This VONROC polishing machine is suitable for removing scratches, polishing off oxidations and for polishing your lacquer. Your car, boat or motorbike will shine like new again! Suitable for both beginners and professionals. Thanks to the compact design, the pads of Ø125mm and the stroke of 9mm, the polisher is also suitable for smaller surfaces.

For which jobs can I use this polisher?

  • Cleaning and polishing your car or boat
  • Removing scratches, polishing off oxidations and applying wax
  • Make lacquer shine and make it scratch free

Fast and safe polishing

This polisher is equipped with soft start electronics to ensure a smooth start of the machine. In this way, the polishing products remain on the disc and you avoid loss of these products. Another main advantage of this polisher is the constant speed electronics. Even during heavy work, the speed remains constant and you get an equal quality without gloss differences. In addition, you can set the speed yourself so you always have the right speed.

Thanks to the 9mm stroke of this eccentric polisher, the lacquer does not heat up quickly  so you can polish all surfaces safe and quick. This in combination with the 4 meter rubber power cable not only gives you full freedom of movement while working, but it also reduces the risk of scratching your car or boat.   

What’s the best polishing disc for your job?

The VONROC polishing set consists of 3 polishing pads - one medium, one fine and one super fine grit. Depending on the polishing substance used, with these three polishing pads you always have the right disc at hand.

To determine which polishing pad you need, we recommend testing it on a test spot. This way, you can check how coarse (or fine) the pad has to be to get the desired result. Start with a fine polishing pad using a white fine grade polishing substance. If you see satisfying results, you can start polishing the entire panel. Each panel to be polished must be tested, because all varnished surfaces are different. If you use a light polishing substance with a polishing pad, you can always use a heavier substance over it later. It is recommended not to do it otherwise.

When the polishing procedure is finished, and all scratches are gone, it is time to choose the right polishing combination. You can use wax or a sealer for that. The VONROC polishing set consists of the most commonly used polishing pads for the most common varnishes and scratches. In general, the pads can be used for:

  • Orange: medium pad for polishing
  • Black: fine pad for polishing / finishing
  • White: ultra fine pad for finishing

(ATTENTION! First test this yourself on a "test spot")

What is in the eco-friendly packaging?

The dual action polisher S_PM504AC is packaged in an eco-friendly brown cardboard box without full-colour printing. The package also includes a useful reusable tool bag for storing the tools and a VONROC Member Card.

Includes:

  • 1x Dual Action Polisher PM504AC
  • 1x Backing plate: 125 mm M8, 10 mm rubber, with velcro
  • 2x Polishing disc 125mm, orange medium
  • 1x Polishing disc 125mm, black fine
  • 1x Polishing disc 125mm, white superfine
  • 1x Allen key for changing the backing pad
  • VONROC Toolbag
  • VONROC Membercard
More Information
EAN Code 8717479089246
Gross weight 2.25
Power input 650W
Mains voltage 230-240V
Frequency 50Hz
No load speed 2000-6800/min
Disc diameter 125mm
Power Cord length 4m
Write Your Own Review
You're reviewing:Dual action polisher 650W - 125mm | Incl. 4 polishing pads
Copyright © 2013-present Magento, Inc. All rights reserved.